CW45 Mobile Computer User Guide 7
The Battery status LED color and
behavior (e.g., steady on, blinking, or off)
indicate the charging status of the
battery. To view status descriptions and
to learn how to modify the Battery LED
behavior, see the next section About the
Battery Status LED Setting.
About the Battery Status LED Setting
You can change the behavior of the Battery Status LED if the out-of-box behavior
for a charging battery (blinking green) is not acceptable to your environment.
You can choose one of three options:
• Default Battery LED (optional Android OS configuration)
• Honeywell Battery LED (factory default, out-of-box configuration)
•Mix Mode
• No Battery LED
Honeywell Battery LED Behavior (Factory Default/Out-of-Box Configuration)
The battery charge is at 50%.
The battery charge is low. You need to charge or replace the battery soon.
The battery is critically low. You need to replace the battery now or connect the computer
to a charging accessory.
The computer is connected to external power and the battery is charging.
There is a battery error. Install another battery. If the problem persists, call Honeywell
Technical Support.
Icon Status
Connected to Power LED State Description
No Blinking amber Battery level is below 15%
No Off Battery level is more than 15%
Yes Steady amber Battery level is between 0% and 60%
Yes Blinking green Battery level is between 60% and 95%
Yes Steady green Battery level is above 95%
Either Blinking red Battery error
To Next Page
Loading...
