CW45 Mobile Computer User Guide 13
Configure the Screen Backlight
The display has an ambient light sensor that automatically adjusts the backlight
intensity to conserve power and ensure the display is readable. You can also
manually set the backlight intensity if you do not want to use the automated
adaptive brightness feature.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings > Display.
3. Choose one of the following options:
• To have the computer automatically adjust the brightness for your work
environment, turn On the Adaptive brightness setting. You can tap
Adaptive brightness to toggle the feature On or Off.
• To set the brightness level manually, verify the Adaptive brightness feature is
turned Off, and tap Brightness level. Adjust the slider to set the brightness
level.
About the Keypad
The CW45 is available with an optional keypad (CW45-KPD).
If your keypad was not preinstalled, refer to the CW45 Accessory User Guide
available on the product page at sps.honeywell.com for installation instructions.
Note: Ensure your device’s firmware is up to date before installing a keypad. (Refer to About
Software Updates and Cyber Security on page 79.)
Note: If the CW45 with attached keypad is inserted into a charging base, communication
with the keypad will be interrupted.
To Next Page
Loading...
