18 CW45 Mobile Computer User Guide
transfer files between the two computers. If you are transferring files to and from a
Mac, use the Android File Transfer application (available from www.android.com/
filetransfer).
Note: File transfer through a USB connection is disabled by default. You need to configure
the USB connection for transferring files or photos.
You can use these accessories to connect your mobile computer to your
workstation:
• Ethernet Home Base and a standard USB Type B to A cable.
Note: For ease of use, enable Auto Rotate Screen when using a communication base (see
page 53).
Configure USB Connection and Transfer Files
Note: The CW45 supports Hi-Speed USB communications (USB 2.0) with a maximum data
transfer rate of 480 Mbps. USB on-the-go (OTG) is supported.
1. Connect the mobile computer to your workstation.
2. On the mobile computer, swipe down from the top of the screen to see the
notifications.
3. Tap the Android System notification twice to open the options menu.
You may need to scroll down to the bottom of your notifications to find it.
4. Select either File Transfer or PTP (picture transfer protocol).
5. Open the file browser on your workstation.
6. Browse to the mobile computer. You can now copy, delete, or move files
between the CW45 and your workstation.
Accessories for the Computer
The CW45 ships with a battery and a mount. All other accessories are ordered and
shipped separately.
For a complete list of compatible accessories for your mobile computer and their
part numbers, see the CW45 Accessory Guide available for download at
sps.honeywell.com.
To Next Page
Loading...
