Honeywell DC300 Series User Manual

DC300 and DC301 Series
Instruction Manual
Honeywell International Inc.
10 Thurber Boulevard
Smithfield, RI 02917
USA
800-873-5242 (US & Canada)
001 800 446 1495 (México)
54 911 3578 8295 (Argentina)
54 911 3578 8295 y 55 11 3309 1021 (Latinoamérica)
11 3309 1000 (Brasil)
50165841-001 Rev A

Honeywell DC300 Series Specifications

General

Standards	NIOSH 42 CFR 84
NIOSH Approval	Yes
Sizes	Small
Head Straps	Yes
Comfort Padding	Yes

Summary

Introduction to DC300 and DC301 Series Respirators

General Safety Warnings and Limitations

Respirator Protection Scope

This respirator protects against certain contaminants but may not eliminate disease or infection risks.

Usage Restrictions and Incompatibilities

Lists environments and conditions where the respirator is not suitable for use.

Critical Warnings for Respirator Use

Consequences of Improper Use

Failure to follow instructions can reduce performance and lead to illness, injury, or death.

Specific Prohibited Applications

Details environments/activities where the respirator must never be used (e.g., sand-blasting, fires).

Atmospheric and Environmental Limits

Defines usage limits based on contaminant concentration, oxygen levels, and confined spaces.

Important Cautions and Compliance

Respiratory Protection Program Requirements

Mandates a written program and compliance with OSHA/CSA standards for occupational use.

Respirator Donning Instructions

User Seal Check Instructions

Seal Integrity Verification

Describes how to check for a proper seal by exhaling or inhaling sharply.

Adjusting Respirator for Optimal Fit

Provides guidance on adjusting the nose clip and straps to ensure a secure seal.