Honeywell NORTH 7600 Series User Manual

1
7600 Series Full Facepiece
Operating and Maintenance
Instruction Manual
Honeywell International Inc.
Honeywell Safety Products Australia Pty Ltd.
900 Douglas Pike
43 Garden Boulevard
Smithfield, RI 02917
Dingley Vic 3172
USA
Australia
Telephone 800 873 5242
001 800 446 1495 (México)
54 911 3578 8295; 55 11 3309 1021
(Latinoamérica)
Telephone (Australia) 1300 139-166
Facsimile (Australia) 1300 362-491
Honeywell Indu’stria e Equipamentos de
Seguranca Ltda
Av. Marg. da Rod. dos Bandeirantes, 100
Jundiaí, SP
Brasil Telefone 55 11 3309 1000
Fax 55 11 3309 1005
New Zealand
Telephone (New Zealand) 0800 322-200
Facsimile (New Zealand) 0800 322-266
www.honeywellsafety.com
©2019 Honeywell International Inc
Part No.46001871 Rev.F
Printed in U.S.A.

Honeywell NORTH 7600 Series Specifications

General

Type	Full Facepiece Respirator
Material	Silicone
Lens	Polycarbonate
Sizes	Small, Medium, Large
Approval	NIOSH approved
Use	Industrial, chemical, and particulate protection

Summary

HEALTH LIMITATIONS

FIT TESTING

INSPECTION

ASSEMBLING THE RESPIRATOR

WARNINGS

PUTTING ON THE RESPIRATOR

USER SEAL CHECKS

Positive Pressure User Seal Check

Check seal by exhaling into the facepiece with exhalation valve covered.

Negative Pressure User Seal Check

EMERGENCY DURING USE

SERVICE LIFE

REMOVING THE RESPIRATOR

CLEANING YOUR FACEPIECE

REPLACING THE LENS AND LENS CLAMP

STORAGE