To Next Page
S
Sabrina LeeAug 11, 2025
Why is my Honeywell DC515N Accessories doorbell not working?
- KkochjustinAug 12, 2025
If your Honeywell Accessories doorbell isn't working, here are a few things to try: 1. Make sure the doorbell isn't muted by pressing the Mute button until all Mute lights are off. 2. Verify that the batteries are correctly installed in both the push button and the doorbell, paying attention to polarity. 3. Test the doorbell in a different location to rule out range issues. 4. Reconnect the doorbell (see 'Connect a Push Button' on page 7). 5. Replace all batteries if needed. 6. Check if the confidence LED on the transmitters is working when activated. 7. Ensure the transmitter is linked with the chime.
General
