Honeywell DC917 Series - User Manual

Installation and Operation Guide
Portable, Wired & Wireless Doorbell
English
German
French
Dutch
Spanish
Portuguese
Italian
DC915/7XX
DW915XX
A1
A2
B1
B2
AC1
AC2
Preparation
Doorbell
Push
Button
Wall
Anchors
Round Head
Screws
Flat Head
Screws
Phillips Screwdriver
Standard Screwdriver
Drill and 1/4 in. (6 mm) Drill Bit
4 C Alkaline Batteries
Doorbell Wall
Mounting Bracket for
DC91X Models Only
Push Button Mounting
Bracket and Adhesive Pad
For installation, you will need
Content will vary according to your kit
The push button supplied with this kit is pre-programmed to operate with the doorbell.
If it is not, see “Connect a Push Button” on page 8. Push button model and
contents may vary from those shown above.
CR2032
Battery
USB Cable
DC917
Models Only
Doorbell Wall
Mounting Bracket for
DW915 Models Only

Summary

Preparation

Installation Requirements

Lists tools and batteries required for installing the doorbell system.

Safety

Safety Warnings

Important safety advice regarding power tools and checking for hidden utilities before drilling.

Installation

Install Doorbell

Instructions on how to mount the doorbell unit using a wall bracket.

Wiring Diagrams (DW9 XX Models Only)

Common Wiring Configurations

Details various wiring scenarios for doorbell systems, including wired and wireless connections.

Install the Push Button

Mounting and Connecting Push Button

Guide on mounting the push button bracket and snapping the button into place.

Install Batteries

Battery Installation Guide

Instructions for installing C alkaline and CR2032 batteries into the doorbell and push button.

Setup and Operation

Test Push Button Pairing

How to test the doorbell's pairing by pressing the push button.

Change the Tune

Select Doorbell Tune

Instructions on using the Music button to cycle through and select doorbell tunes.

Change the Light Pattern

Select Light Pattern

How to use the Sunlight button to select different flashing light patterns for the doorbell.

Change Halo Light Colour

Select Halo Light Colour

Steps to change the halo light colour by pressing the push button and Sunlight button.

Adjust Volume

Adjust Doorbell Volume

How to use the volume buttons to increase or decrease the doorbell's sound level.

Doorbell Mute Functions

Mute and Timed Mute

Instructions for silencing the doorbell and setting specific mute durations.

Accessories

Accessory Connection Overview

Information about connecting up to six accessories like push buttons and sensors.

Connect a Motion Sensor

Motion Sensor Setup and Linking

Steps to link a motion sensor and adjust its settings for optimal operation.

Connect a Push Button

Push Button Pairing and Customization

Detailed steps for pairing a new push button and customizing its ring and light colour.

Customize Doorbell (DC917 XX Models Only)

Custom Tunes

How to install custom MP3 files as doorbell tunes using a USB connection.

Secret Knock Feature

Set Up Secret Knock

Instructions for setting up a custom ring and light for a 'Secret Knock' triggered by triple-pressing.

Range Extender Function

Range Extender Explanation

Explanation of the built-in range extender feature for boosting signal up to 200m.

Maintenance and Notifications

Battery Maintenance and Low Battery Alerts

Overview of battery maintenance and how low battery levels are indicated for the doorbell and push button.

Reset Doorbell

Factory Reset Procedure

Procedure to reset the doorbell to factory default settings, removing all paired devices.

Troubleshooting

Common Issues and Solutions

Guides on resolving common problems like doorbell not working, beeps, or reduced range.

Honeywell DC917 Series Specifications