To Next Page
J
Jacob BentleyJul 27, 2025
How to fix a Honeywell Accessories doorbell that is not working?
- RrichardmooreJul 28, 2025
If your Honeywell Accessories doorbell isn't working, here are some steps to try: * Ensure all Mute lights are off by pressing the Mute button. * Verify that the correct batteries (4 C alkaline cells, 1 CR2032) are installed with the correct polarity. * Test the doorbell in a different location to rule out range issues. * Reconnect the doorbell, following the instructions in “Connect a Push Button” on page 8. * Check and replace batteries if needed. * Confirm the confidence LED on the transmitters is working when activated. * Ensure the doorbell isn't muted. * Check that the transmitter is linked with the chime.
General
