5
GETTING STARTED
1. Ensure that the unit is powered off and unplugged.
2. Select a firm, level, and flat location. Ensure the unit is more than
6 inches away from the closest wall or furniture so that the grille
is not blocked. Portable air purifiers are more effective in rooms
where all doors and windows are closed.
NOTE: If the unit is placed on a light-colored carpet, a small mat
or rug should be used underneath to prevent staining. This is
especially important in homes with contamination from smoking, fireplaces, or where candles are burned.
3. Remove the filter grille cover by grasping the recess in the top center of the grille cover and pulling forward.
4. Remove the round filter cartridge from the air purifier by pulling on the tab on the top of the filter. This
cartridge contains a wrapped HEPA Filter and wrapped PreFilter.
5. Remove protective plastic wrap from Filter(s).
6. Wrap the PreFilter around the HEPA Filter cartridge and secure it with the fasteners provided.
7. Place the Filter(s) back into the air purifier housing, making sure the plastic ring is at the top and the
tab faces out.
8. Replace the filter grille cover by placing the tabs on the bottom of the grille into the slots on the unit.
Gently push the top of the grille until secure.
1
$
4 5
2
7
8
6
3
ENERGY STAR
The energy efficiency of this
ENERGY STAR certified model
is measured based on a ratio
between the model’s CADR for
Smoke and the electrical energy
it consumes, or CADR/Watt.
To Next Page
Loading...
Need help?
General
