10
Battery Status
The green LED indicates the status of the battery charge.
Note: The LED behavior differs if the DEX-BLE-10 is connected to an
external power source (e.g., power cable and wall charger) instead
of using battery power.
Power LED Status Description
External (Cable/
Power Source)
Flash Battery charging
External (Cable/
Power Source)
Solid Battery fully charged
Battery Flash
5-seconds On
5-seconds Off*
Battery Low,
Less than 20%
Battery Off* Battery Charge is between
20% and 80%.
Battery Solid
5-seconds On
5-seconds Off*
Battery Fully Charged
* LED status after initial device power on sequence.
Preliminary Draft, Not for Release, For Review Purposes Only
Preliminary Draft, Not for Release, For Review Purposes Only
To Next Page
Loading...
