Honeywell DEX-BLE-10 User Manual

8
Pair the DEX-BLE-10 with a Mobile Computer
The DEX Wireless Adapter supports Honeywell devices on
Android 6 and higher.
To pair the DEX-BLE-10:
1. Verify the mobile computer is turned on and Bluetooth and
NFC are enabled.
2. Turn ON the DEX-BLE-10.
3. Place the DEX-BLE-10 back to back with the mobile
computer. The NFC antenna is on the back of the DEX
wireless adapter. The mobile computer initiates the pairing
process with the adapter.
4. Follow the on-screen prompts to establish a connection and
transfer data.
Preliminary Draft, Not for Release, For Review Purposes Only
Preliminary Draft, Not for Release, For Review Purposes Only

Honeywell DEX-BLE-10 Specifications

General

Brand	Honeywell
Model	DEX-BLE-10
Category	Adapter
Language	English