3
Dolphin 6110 Bottom Connectors
Step 1: Install the Main Battery
Ensure all components are dry prior to mating terminals/batter-
ies with peripheral devices. Mating wet components may cause
damage not covered by the warranty.
We recommend use of Honeywell Li-Ion battery packs. Use of
any non-Honeywell battery may result in damage not covered
by the warranty.
There is a danger of explosion if the batteries are incorrectly
replaced. Replace the batteries with only the same or equiva-
lent type recommended by the manufacturer. Dispose of used
batteries according to the recycle program for batteries as
directed by the governing agency for the country where the bat-
teries are to be discarded.
DC Power Jack
I/O Connector
To Next Page
Loading...
