7 - 12 Rev C
4/30/2008
Dolphin® 7850 Mobile Computer
User’s Guide
Network Cards
The Connections tab (see Connections Tab on page 7-6) contains a Network Cards icon that
displays the network cards installed in the terminal.
1. Tap Start > Settings > Connections > Network Cards
2. Tap on an adapter in the list to review its settings. (Server-assigned IP addresses use DHCP.)
3. If you make a change on one of these tabs, tap OK to confirm the changes.
4. You must perform a soft reset to update the registry entries; see Soft Reset (Warm Boot) on page 3-
15. During the soft reset, the new registry entries are created and can be read by the applications
that need them.
Do NOT perform a Hard Reset (Cold Boot) (see page 3-15) after modifying an adapter here. Hard resets return
the terminal to factory defaults, which erases network adapter modifications made here.
!
To Next Page
Loading...
