To Next PageTo Next PageHow to fix Status LED if it does not come on when I insert a battery pack in Honeywell Dolphin 99EXLF PDA?
If the Status LED doesn't turn on when you insert a battery pack into your Honeywell PDA, verify the power connections. Ensure the power cable is properly connected to the power supply connector and that the battery pack is correctly seated.
Why does the Status LED light red during charging on my Honeywell Dolphin 99EXLF?
If the red Status LED illuminates during charging of your Honeywell PDA, it could indicate an issue with the battery pack or the charging circuitry. You can try charging the battery in another charging slot to determine the source of the problem.
What to do if the Status LED flashes red without a battery in the charging slot for Honeywell Dolphin 99EXLF?
If the Status LED flashes red on your Honeywell PDA charger without a battery, it means the slot hasn't reset after a battery was removed in failure mode. To fix this, insert a working battery into the slot, or power cycle the QuadCharger.
Why does the Honeywell Dolphin 99EXLF status LED light red during charging?
The red status LED during charging could indicate a problem with the battery pack or the charging circuitry. You can try charging the battery in another slot to see if the issue persists. If the red status remains with the charging slot, the problem lies with the charging circuitry. If the red status appears again, the issue is with the battery pack.
How to fix a Honeywell Dolphin 99EXLF when the status LED doesn't turn on after inserting the battery?
If the status LED doesn't come on when you insert a battery pack, check the power connections to ensure the power cable is properly inserted into the power supply connector and that the battery pack is correctly seated.
General