9
International Inc. or an authorized service center for
inspection. Refer to Technical Assistance on page 24.
• If you are not sure the battery or charger is working
properly, send it to Honeywell International Inc. or an
authorized service center for inspection.
• Excessive discharge can degrade battery
performance. Recharge the battery when your terminal
indicates low battery power.
• Although your battery can be recharged many times,
the battery life is limited. Replace it after the battery is
unable to hold an adequate charge.
Suspend Mode
The terminal goes into Suspend Mode automatically when
the terminal is inactive for a programmed period of time.
You can program this time on the Advance tab of the
Power System Setting. For additional information, refer to
the
Dolphin 99EX/99GX User’s Guide
located on the Web
at www.honeywellaidc.com.
To put the terminal into Suspend Mode manually, press
the Power key , and the screen goes blank.
To wake the terminal from Suspend Mode, press the
Power key or SCAN key .
Note: You should always put the terminal in Suspend Mode before
removing the battery door. For information on how to
remove the battery see page 6.
To Next Page
Loading...
Need help?
General