Honeywell Dolphin 99EXLF Quick Start

23
Soft Reset (Warm Boot)
A soft reset re-boots the device and preseves any objects
created in RAM.
1. Press and hold the CTRL + ENTER keys
for approximately 5 seconds.
2. The decode and scan LEDs flash for approximately
three seconds as the terminal resets.
3. When the reset is complete, the Today screen
displays.
Hard Reset (Cold Boot)
A hard reset re-boots the device and closes any open
applications running in RAM at the time of the reset.
1. Press and hold the CTRL + ESC keys for
approximately 5 seconds.
2. The decode and scan LEDs light for approximately
3 seconds.
3. The terminal re-initializes.
Factory Reset
Contact a Honeywell technical support representative for
information on how to perform a factory reset. For contact
information, see Technical Assistance on page 24.
ALT
CTRL
ENT
ALT
CTRL
ESC

Honeywell Dolphin 99EXLF Specifications

General

Brand	Honeywell
Model	Dolphin 99EXLF
Category	PDA
Language	English