G. R. • 2-93 • © Honeywell Inc. 1993 • Form Number 62-3038
■ Includes built-in brass shutoff valve for servicing
without system shutdown.
■ Contains removable float/valve assembly for easy
servicing.
■ Includes safety drain connection and vent cap with
leakage guard.
■ Internal parts made of corrosion-resistant and
chemical-resistant materials for use with water
systems containing glycol, mineral oils, or petro-
leum-based oils.
■ For use with water systems up to 230° F [110° C].
■ Not suitable for steam systems.
■ Uses 1/8 in. NPT male pipe thread.
■ Maintains quiet and efficient operation.
CONTENTS
Specifications ................................................ 2
Ordering Information .................................... 2
Installation .................................................... 3
Operation ...................................................... 4
Service ........................................................... 4
Troubleshooting ............................................ 5
EA122A
Automatic Air Vent
The Honeywell Braukmann EA122A
Automatic Air Vent purges air from high
pressure mains and equipment in hot or cold
closed water systems.
To Next Page
General
