Honeywell Enraf VITO-LT User Manual

Installation guide 762 VITO interfaces & VITO probes Page 1
Installation guide 762 VITO Interfaces
& VITO, MTT, LT, MRT and MPT probes
June 2014
Part no. 4416.648
Rev. 9
Honeywell Enraf
P.O. Box 812
2600 AV Delft
Netherlands
Tel.: +31 15 2701100
Fax: +31 15 2701111
E-mail: hfs-tac-support@honeywell.com
H
Website: www.honeywellenraf.com

Honeywell Enraf VITO-LT Specifications

General

Brand	Honeywell
Model	Enraf VITO-LT
Category	Test Equipment
Language	English

Summary

Safety

Safety aspects of the VITO Interfaces & probes

Details safety aspects and environmental conditions for VITO Interfaces and probes.

Personal safety

Covers technician's required skills and safety gear for hazardous areas.

Mechanical installation

Mechanical installation of 764/767/361/MRT temperature probe

Describes installation methods for 764/767/361/MRT temperature probes.

Installation in a vertical thermowell

Details installation of probes in vertical thermowells, including requirements.

Installation directly in the tank, suspended from roof nozzle

Explains probe installation directly in the tank using anchor weights.

Mechanical installation of 765/766/768/365 VITO water (and temp.) probe

Covers installation of 765, 766, 768, and 365 VITO probes in tanks.

Removing VITO temperature probe on cryogenic tank

Installation 762 VITO Interface

Standard version (without optional IP adapter)

Version with optional IP adapter

Electrical installation

Bonding of the VITO Interface

VITO Interface wiring to tank level gauge

Supply / data communication connection for 361 VITO MPT probe, 76x VITO probes and MRT

Supply / data communication connection for 365 VITO MPT probe

Sensor connections