Need help?Do you have a question about the Honeywell Envitec AlcoQuant 6020 plus and is the answer not in the manual?
General| Model | AlcoQuant 6020 plus |
|---|---|
| Type | Breath Alcohol Tester |
| Measurement Principle | Electrochemical Oxidation |
| Measurement Range | 0.00 to 2.50 mg/L |
| Resolution | 0.01 ‰ |
| Accuracy | ±0.05 ‰ at 0.50 ‰ |
| Operating Temperature | -5 to +50 °C |
| Printer | Optional thermal printer |
| Sensor | Electrochemical |
| Sample Volume | Approximately 1.2 L |
| Storage Temperature | -4°F to 140°F |
| Display | LCD |
| Power Supply | Rechargeable battery |
Provides an overview of the device's main operating menu and navigation.
Instructions for powering the device on and off, including self-test procedures.
Configuration options for device settings like date, time, and display.
Procedure for performing a test printout to verify printer connectivity.
Accessing device information such as start text, device details, and memory status.
Guidance on how to print measurement results from the device.
Steps to connect the device to a PC for data transfer and analysis.
Detailed procedure for performing breath alcohol measurements using the active mode with a mouthpiece.
Instructions for checking ambient air for alcohol content using the passive measurement mode.
Explanation of how measurement data is stored, managed, and when memory is full.
Procedure for replacing the device's batteries.
Information on using the rechargeable battery pack and charging station.
To Next Page