AlcoQuant 6020 plus
Doc no.: 059-07-1001779_A6020plus_WL_GB-5.2.1 / 12.2021 25
4.3 Data memory
The device provides a data memory to log measured values. Each alcohol measurement
performed is automatically stored with date, time, measured value and log number. The last
9999 data records are stored in the data memory.
Once the internal memory is 95% full (9,499
measurem
ents), a "Memory 95% full" message
appears in the display.
The yellow LED illuminates to indicate that the internal
memory is (almost) full.
This warning must also be confirmed pressing >OK<
once.
After the 9,999th measurement, the message
"Memory full" appears on the display. If any further
measurements are taken, a query appears asking
whether old data should be overwritten. This has to be
confirmed once by pressing >YES< or >NO< and does
not appear again until the device is restarted.
The red LED illuminates to indicate that the internal
memory is full. The full state is also indicated
beep.
This warning must also be confirmed by pressing
>OK< once. Then the oldest measurement will be
automatically overwri
tten by the new measurement
value!
To Next Page
Loading...
Need help?
General
