69-0419—2
1. Make sure the furnace or air conditioner
blower is running.
2. On models without the Solid State
Performance Indicator, if the electronic cells are
wet, check again in 2 to 3 hours.
3. Make sure the appropriate fuse or circuit
breaker is ok.
1. Cell and prefilter washing is past due; wash
as soon as possible.
2. Make sure cell(s) are correctly installed in air
cleaner.
3. Wipe ionizer wires to remove deposits.
NOTE: Use the wash reminder schedule to
establish a washing schedule that prevents the
WASH LED from coming on.
1. Make sure cell(s) are clean and dry.
2. Check cell(s) for visible damage.
Call your heating and air conditioning dealer.
The WASH LED
on the W8600E
comes on
The CHECK
LED on the
W8600E comes on
You smell ozone
and find it
objectionable
The neon light
on the air cleaner
doesn’t come on
21
To Next Page
Loading...
Need help?
General
