69-0419—2
OPERATING YOUR ELECTRONIC AIR CLEANER
Set the ON-OFF switch to ON. The air
cleaner will now operate whenever
your furnace/air conditioning system
fan operates. For maximum air
cleaning benefit and cleaner air
conditioner coils, leave the air cleaner
switch on at all times and the fan
switch on your thermostat on. Of
course, continuous fan operation will
add a small amount to your electric bill
each month.
When the fan comes on, the neon light
located near the ON-OFF switch will
light, indicating that the air cleaner is
functioning.
ONE-CELL MODEL SHOWN.
If your air cleaner is equipped with a
wall-mounted W8600E Solid State
Performance Indicator (see page 2),
the ON LED will be on
whenever the
air cleaner is in operation
. Of course,
the system fan will also be running.
You may hear a snapping electrical
arcing sound occasionally as the air
cleaner operates. This is usually
caused by a larger dust particle
causing a high voltage discharge. The
snapping sound means that your air
cleaner is working as it should.
CHECK
WASH
ON
3
To Next Page
Loading...
Need help?
General
