Honeywell F90A1050 - Page 9

F90A,B SELF-CONTAINED COMMERCIAL ELECTRONIC AIR CLEANER
68-0103-6 Revised 11-07
8
1. LOCATE WASH LED CUTOUT BEHIND 
SWITCH COVER ASSEMBLY STICKER.
2. USE A KNIFE TO CUT A HOLE IN 
THE STICKER.
3. PUSH LED LENS INTO PLACE. 4.
INSERT LED INTO LENS FROM BACK 
OF THE SWITCH COVER ASSEMBLY.
5. ATTACH NEW STICKER TO SWITCH 
COVER ASSEMBLY.
6. REINSTALL SWITCH COVER ASSEMBLY 
SCREWS.
M6832
Fig. 6. Installing the WASH LED.