Need help?Do you have a question about the Honeywell FocusPRO 6000 5-1-1 and is the answer not in the manual?
General| Type | Programmable Thermostat |
|---|---|
| Stages | 1 Heat/1 Cool |
| Changeover | Manual |
| Operating Modes | Heat, Cool, Off |
| Fan Modes | Auto, On |
| Filter Change Alert | Yes |
| Programming | 5-1-1 Day |
| Display | Backlit |
| Power Source | Hardwired/Battery |
| Temperature Range | Heat: 40°F to 90°F; Cool: 50°F to 99°F |
| Terminal Designations | R, C, W, Y, G |
| Temperature Control | ±1°F |
| Hold Feature | Yes |
| Weight | 6.4 oz (181 g) |
Compares the screen dimensions of various thermostat models, including available alternatives.
Details the warranty period offered for each thermostat model in the comparison.
Outlines the programmable scheduling options (e.g., 5-1-1, 5-2) available for each thermostat.
Indicates if thermostat models can display both setpoint and room temperature simultaneously.
Describes the interface used for controlling system and fan operation on each thermostat.
Confirms whether the display screen of each thermostat model is backlit for visibility.
Details how each thermostat model is powered, including battery, hardwire, or dual options.
Specifies if thermostats automatically switch between heating and cooling modes.
Notes the presence of adaptive recovery technology for optimizing heating/cooling times.
Confirms whether thermostat models are compatible with millivolt heating systems.
Specifies the number of heating and cooling stages supported by each thermostat model.
Indicates if thermostat models can be configured for heating-only system operation.
Indicates if thermostat models can be configured for cooling-only system operation.
Confirms if thermostat models are designed to work with single-stage heat pump systems.
Details compressor protection features and selectable time delays for cooling mode.
Details compressor protection features and time delays for heat pump heating mode.
Checks compatibility with Series 20 hot water zone valves (power open/close).
Confirms compatibility with normally open and normally closed hot water zone valves.
Notes whether the thermostat models support the use of dual transformers.
Specifies the type of output switching mechanism (e.g., Relay, Triac) used by the thermostat.
Lists the number of Contractor PRO Points assigned to each thermostat model.
