To Next PageTo Next Page
Need help?Do you have a question about the Honeywell FocusPRO 6000 Series and is the answer not in the manual?
General| Display | Digital |
|---|---|
| Programmable | Yes |
| Backlit Display | Yes |
| Temperature Control | ±1°F |
| Filter Change Alert | Yes |
| Backup Battery | Yes |
| Power Source | Battery |
| Compatibility | Heat Pump |
| Temperature Range | 40°F to 90°F (4°C to 32°C) |
| Changeover | Manual |
| Hold Feature | Yes |
| Weight | 0.5 lbs |
| Dimensions | 5.5 x 3.5 x 1 inches (140 x 89 x 25 mm) |
Press to select the function displayed just above each button.
Press to override programmed temperature control.
Press to set preferred temperature.
Displays current time, inside temperature and settings.
Indicates when batteries are low and need replacement.
Displays the current indoor temperature detected by the thermostat.
Shows current time, day, and thermostat program schedule.
Selects fan operation mode: Auto or On.
Buttons beneath functions to view or change settings.
Displays the desired temperature setting.
Indicates current system mode: Cool On, Heat On.
Indicates auxiliary heat status for heat pumps.
Set time and temperature for morning.
Set time and temperature for when away.
Set time and temperature for evening.
Set time and temperature for overnight.
Adjust wake time and temperature for Mon-Fri.
Adjust leave time and temperature for Mon-Fri.
Adjust time and temperature for Sat-Sun.
Eliminate unwanted time periods (except Wake).
Override current temperature setting until next scheduled period.
Cancel temporary setting and resume programmed schedule.
Permanently adjust temperature, overriding the schedule.
Cancel permanent hold and resume programmed schedule.
Press to select 'Auto' system setting.
Compressor waits a few minutes before restarting to prevent damage.
Display shows 'Cool On' or 'Heat On' while waiting.
Thermostat learns to reach scheduled temp by the scheduled time.
Indicates when Adaptive Intelligent Recovery is active.
Flashes when batteries are low, about two months before depletion.
Insert fresh AA alkaline batteries and reinstall battery holder.
Visit yourhome.honeywell.com or call 1-800-468-1502.
Turn thermostat over to find model and date code.
Check circuit breaker, power switch, furnace door, and batteries.
Check settings, breaker, power, furnace door, and wait 5 minutes.
Ensure temps are within acceptable ranges (Heat 40-90°F, Cool 50-99°F).
Compressor protection engaged. Wait 5 minutes for restart.
Press SET CLOCK/DAY/SCHEDULE, SET SCHEDULE, DONE & NEXT.
Covers defects in workmanship/materials for five years.
Contact Customer Care or return to place of purchase.
Excludes incidental/consequential damages and installation costs.
Write or call Customer Relations for warranty questions.
