Honeywell FocusPRO - User Manual

FocusPRO
®
Wireless Thermostats
® U.S. Registered Trademark.
Copyright © 2008 Honeywell International Inc.
All rights reserved.
Wireless control for up to 3 Heat/2 Cool heat pump systems or up to
2 Heat/2 Cool conventional systems.
MERCURY NOTICE: If this product is replacing a control that contains mercury in a
sealed tube, do not place the old control in the trash. Contact your local waste
management authority for instructions regarding recycling and proper disposal.
Must be installed by a trained, experienced technician. Read these instructions
carefully. Failure to follow these instructions can damage the product or cause a
hazardous condition.
Español: vea la página 9 • Français : voir la page 17
Non-zoned systems
• Single thermostat with wireless
Equipment Interface Module
(EIM).
Zoned systems
• Up to 4 thermostats with
TrueZONE
™
panel & wireless
adapter.
Installation guide for:
Need Help?
For assistance with this product please visit http://customer.honeywell.com
or call Honeywell Customer Care toll-free at 1-800-468-1502
Installation
Guide

Honeywell FocusPRO Specifications

General

Model	FocusPRO
Programmable	Yes
Operating Modes	Heat, Cool, Off, Auto
Temperature Control	±1°F (±0.5°C)
Hold Feature	Yes
Filter Change Alert	Yes
Stages	1 heat, 1 cool
Changeover	Manual
Programming	7-day programmable
Battery Life	Approximately 1 year

Summary

Install batteries

Link thermostat(s) to wireless network

Customize thermostat (installer setup)

Thermostat error codes

Lists error codes and their meanings for troubleshooting setup problems.

Special functions

Comfort;Economy setup

Explains how Comfort/Economy modes affect auxiliary heat response and setpoint achievement.

System test

Equipment damage hazard warning

Warns about potential equipment damage due to compressor protection bypass during testing.

Mount thermostat

Replacing system components

Instructions for replacing thermostats and re-linking them to the wireless system after installation.