Honeywell Galaxy Flex 20 V3 User Manual

Remote Access [47] Galaxy Flex Installer Manual
76
  3 = Terminate Idle – Idle Time 10 (0-60 mins)
 
  4 = Conn Retry
  
   1 = Retry Interval 30 (0-60) mins
  
   2 = Retry Duration 06 (0-24) hours
  
   3 = Redial Mode
  
   0 = Off
  
   1 = Retry
  
   2 = Direct
 
  5 = Control Upload
  
   1 = Eng Prog
  
   2 = User Prog
  
   3 = Either
 
  6 = Remote Maint
  
   1 = Schedule 000 (0-365) days
  
   2 = Advice
  
   1 = Code Only
  
   2 = Code + Notice
  
   3 = No Code/Notice
 
  7 = Service PIN
 
  8 = Send Panel ID
  
   1 = Name
  
   2 = Schedules
 
  9 = Delay Time 10 (3-10) secs

 5 = SMS Paging

 1 = Int Telecoms
 
  1 = Mobile No.1
 
  2 = Mobile No.2
 
  3 = Mobile No.3

 2 = GSM

 1 = Mobile No.1

 2 = Mobile No.2

 3 = Mobile No.3
Service [47.1]
U
se this option to control the access mode of the remote servicing package. You need type 6
status to use this option.
PSTN [47.1.0]
Use this option to select the on-board telecoms as the communication device.

Honeywell Galaxy Flex 20 V3 Specifications

General

Brand	Honeywell
Model	Galaxy Flex 20 V3
Category	Security System
Language	English