10
Exposure Backlight Settings
Select HME, BLC or WDR. Press the OSD controller joystick to select and set the various
parameters.
HME Backlight
HME (Highlight Mask Exposure) allows objects to appear clearly by masking the extremely
bright areas on the screen.
Select HME from the BACKLIGHT setting to turn on HME. Then configure the available
parameters.
BLC Backlight Compensation
LEVEL Use the slider to select an HME level from 0 to 20. The lower the setting, the darker the HME
mask will be on the screen.
MODE ALL DAY: Select to run HME all the time.
NIGHT ONLY: Select to only run HME at night (B/W mode only).
To Next Page
Loading...
Need help?
General
