Need help?Do you have a question about the Honeywell HDZ408LIWV and is the answer not in the manual?
General| Resolution | 1080p |
|---|---|
| Field of View | 110° |
| Night Vision | Yes, up to 30ft |
| Power Source | Battery or Wired |
| Weather Resistance | IP65 |
| IR Distance | 30ft |
| Ingress Protection | IP65 |
| Two-Way Audio | Yes |
| Motion Detection | Yes |
| Connectivity | Wi-Fi |
| Camera Type | Wireless |
| Storage | Cloud or MicroSD Card |
| Lens | 2.8mm fixed |
Guide to downloading and installing the Unified Tool for camera setup and management.
Instructions for assigning a static IP address to the network camera.
Steps to access and control the camera through a web browser interface.
Details on how to access the camera's web interface and log in with credentials.
Overview of setting up and managing Pan-Tilt-Zoom camera functions.
Steps to set, rename, and remove camera presets for PTZ control.
Guide to using the PTZ control interface for camera movement and adjustments.
Instructions on how to download recorded video files or clips.
Methods for viewing and downloading recorded snapshots.
Adjusting camera properties like picture, exposure, and lighting.
Settings for anti-flicker, exposure modes, auto iris, and noise reduction.
Configuration options for camera focus, zoom speed, and lens initialization.
Settings for IPv4, IPv6, ARP, and Ping configurations.
Steps to configure static or DHCP IP addresses for IPv4.
Procedure for using ARP/Ping service to assign an IP address to the camera.
Process for adding specific IP or MAC addresses to allow camera access.
Instructions for modifying existing IP/MAC addresses in the approved list.
Steps to remove IP/MAC addresses from the list of approved users.
To Next Page