To Next PageTo Next Page
Need help?Do you have a question about the Honeywell Performance HDZP252DI and is the answer not in the manual?
General| Resolution | 2 MP (1920 x 1080) |
|---|---|
| Lens | Fixed |
| Focal Length | 2.8mm |
| Weather Resistance | IP66 |
| Motion Detection | Yes |
| Two-Way Audio | No |
| Night Vision | Up to 30m (98ft) |
| Power Supply | 12V DC, PoE |
| Storage | MicroSD card (up to 128GB) |
| Connectivity | Ethernet |
| Operating Temperature | -22°F to 122°F (-30°C to 50°C) |
Introduces the Performance Series 1080p IP PTZ cameras and their applications.
Lists the primary features of the Performance Series 4K IP cameras.
Step-by-step guide for installing the ConfigTool IP utility software on a PC.
Instructions on using ConfigTool to locate IP devices on the network.
Guide to setting a static IP address for the camera via ConfigTool.
Details the procedure for updating the camera's firmware using ConfigTool.
Steps for logging into the camera via the web client, including network prerequisites.
Introduces the Live View interface and its four main control areas.
Guides on finding and playing recorded video files using the calendar interface.
Describes viewing and configuring camera settings within the Conditions tab.
Details how to adjust picture parameters like brightness, contrast, saturation, and sharpness.
Explains how to configure exposure parameters like anti-flicker, gain, aperture, and shutter priority.
Covers configuration of backlight compensation modes like WDR and HLC.
Explains configuration of motorized focus and zoom functions for the camera.
Details settings for video streams, including encoding, resolution, and frame rate.
Details TCP/IP settings such as host name, IP address, and DHCP/Static mode.
Guides on adding and removing schedules for recording and snapshots with color codes.
Covers local host setup, including camera name, language, and GUI settings.
Details user and group management, including adding, modifying, and rights configuration.
Overview of programming PTZ functions like presets, tours, and scans.
Guides on programming, deleting, and navigating to PTZ preset positions.
Details programming up to eight tours consisting of preset points for automated camera movement.
Overview of configuring event detection features like motion and tampering.
Details enabling and configuring motion detection parameters and actions.
Details enabling and configuring video tampering detection and associated actions.
Explains enabling and configuring audio detection based on intensity changes and thresholds.
Details enabling and configuring face detection to capture snapshots or recordings of detected faces.
Details how to configure alarm types, prompts, and audible tones.
