Honeywell Performance HDZP252DI - Preset Programming and Navigation

www.honeywell.com/security
80 | Performance Series IR 1080p IP PTZ Camera User Guide
Figure 6-1 Preset Position Configuration Interface
3. Under the video screen, use the PTZ controls to move the image to the desired preset
position.
4. Adjust the Zoom, Focus and Iris settings using the + and – buttons for each setting, as
required.
5. If required, double-click the Preset Title to enter a specific preset title.
6. If required, double-click the Preset No. to enter a different preset number for the current
preset.
7. Click the Save icon ( ) for the preset to save it.
Deleting a Preset Point
1. Navigate to Setup  PTZ  Function  Preset (see Figure 6-1).
2. Click the Delete icon ( ) for the preset you want to delete.
Note Alternatively, you can click Clear to delete all of the presets in the list.
Go to a Preset Point
1. Navigate to Setup  PTZ  Function  Preset (see Figure 6-1).
2. Select the preset that you want the camera to move to from the Preset list. The camera will
move to point at that preset position.