www.honeywell.com/security
64 | Performance Series IR 1080p IP PTZ Camera User Guide
Configuring Storage Settings
Recording Schedule and Snapshot Schedule
You can add or remove schedules for recording and snapshots. There are three recording
modes: General (auto), Motion Detection and Alarm. You can configure up to six recording
periods per day.
Note Ensure that you have enabled the corresponding recording mode in
Setup Storage Conditions.
Figure 5-28 Recording Schedule Configuration Interface
Recording Schedule Color Codes:
• Green: General recording/snapshot
• Yellow: Motion detection recording/snapshot
• Red: Alarm recording/snapshot
Setting Holidays
You can set specific days as holidays, for which the recording schedule can have a different
setup. When enabled, the selected/configured dates will record according to the Holiday
schedule setup.
To Next Page
Loading...
