Configuring Camera Settings | 63
800-22757 - A - 02/2017
Figure 5-26 802.1X Configuration Interface
QoS
Quality of Service (QoS) is a network security mechanism. It fixes problems with network delay
and jams. For network service, for example, the quality of service includes the transmission
bandwidth, delay, and packet loss. Through QoS, we can guarantee the transmission
bandwidth, reduce the delay, reduce the loss of data packets, and enhance the quality with
packet prioritization.
Figure 5-27 QoS Configuration Interface
Table 5-19 802.1X Configurations
Parameter Function
Enable Check to enable the IEEE802.1X function.
Authentication PEAP (protected EAP protocol)
Username
Enter a username to log in. This username is authenticated by the
server.
Password Enter a password.
Table 5-20 QoS Configurations
Parameter Function
Realtime Monitor
This value ranges from 0 to 63. The router or the switcher can provide
different service for different packets.
Command
This value ranges from 0 to 63. The router or the switcher can provide
different service for different packets.
To Next Page
Loading...
