Getting Started with the ConfigTool | 15
800-22757 - A - 02/2017
Figure 2-2 Network Settings
Upgrading the Device’s Firmware
Before using the camera, make sure that the latest firmware is installed. You can upgrade a
single device or multiple devices at the same time.
To upgrade a single device:
1. Select the device to upgrade from the list of devices in ConfigTool.
2. Click Login. Enter the login user name and password for the device (the default user name
is admin and the default password is 1234), and click OK.
3. Click the Upgrade tab on the Config screen (see Figure 2-3).
4. Click OpenFile, navigate to the directory that contains the firmware file, and then click
Upgrade.
To Next Page
Loading...
