www.honeywell.com/security
32 | Performance Series IR 1080p IP PTZ Camera User Guide
Creating a Video Clip
You can clip and save a section of recorded video during video playback using the clip function.
Figure 4-8 Clip Function Controls
Note Playback of recorded video is automatically paused during clipping.
1. Find the recording that you want to create a clip from (see Playing Back Recorded Video
on page 28).
2. On the timeline, click the recording at the time you want to start the clip, and then click
. This designates the start time of the clip.
3. Next, click the recording at the time you want to end the clip, and click . This
designates the end time of the clip.
4. Click to save the clipped file to your local PC. To configure the saving path, see Path
on page 65.
Viewing Snapshots
1. In the Playback interface, in the calendar area, do the following:
a. Select jpg in the File Type box.
b. Select SD Card in the Data Src box.
c. Select the month and year that you want to search. Dates with snapshots are shown
in blue.
d. Click the date (in blue) that you want to view snapshots for.
To Next Page
Loading...
