www.honeywell.com/security
68 | Performance Series IR 1080p IP PTZ Camera User Guide
Configuring System Settings
General System Setup
The general system interface includes the local host setup (including the camera name and GUI
language), and the date/time setup.
General
Figure 5-35 General System Configuration Interface
Table 5-24 Record Control Configurations
Parameter Function
Pack Duration Select the file size. The default is 30 minutes.
Pre-event Record
Enter a pre-record value. The number of seconds to be recorded before
the event trigger.
For example, the system can record the four seconds of video in the
buffer. Recording begins up to five seconds before the event trigger.
Disk Full
Select to Stop Recording or Overwrite the previous files when the
HDD is full.
Overwrite: If the current working HDD is full, then the system will
overwrite the oldest file.
Stop: If the current working HDD is full or is overwriting, the system will
stop recording.
Record Mode Select Auto, Manual, or Off.
Record Stream Select to record from the Main Stream or the Sub Stream.
To Next Page
Loading...
