Configuring Camera Settings | 69
800-22757 - A - 02/2017
Date and Time
Figure 5-36 Date and Time Configuration Interface
Table 5-25 General System Configurations
Parameter Function
Device Name Enter the camera’s name.
Language Select a language from the drop-down list.
Video Standard Select the video standard: NTSC or PAL.
TVOut Select the TV output as either OFF (default) or TV.
Max Log Quantity Enter the maximum number of logs that will be stored by the camera.
Table 5-26 Date and Time Configurations
Parameter Function
Date Format Select a date format from the drop-down list.
Time Format Select a time format, either 24-hour or 12-hour.
Time Zone Select the time zone for the camera.
Current Time Set the camera’s time and date. Click Save to activate this time.
Sync PC Click to sync the camera’s time with your PC’s time.
DST
Set when Daylight Saving Time begins and ends. Select either Date or
Week mode. For Date mode, you can enter the specific dates in the
year for DST changeover. For Week mode, you select the relative week
and date so it can be repeated for every year (2nd Sunday in March, for
example).
NTP Click to enable NTP.
To Next Page
Loading...
