Configuring Camera Settings | 67
800-22757 - A - 02/2017
NAS
On the NAS tab, you can enable the NAS storage function. When enabled, event-triggered video
and snapshots (either scheduled or motion detection, depending on what you chose in Path on
page 65) will be saved to the specified NAS server.
Figure 5-33 NAS Configuration Interface
Record Control
Figure 5-34 Record Control Configuration Interface
Remote Directory
Set storage directory where recorded video and snapshots will be
stored.
Emergency (Local)
Enable Emergency (Local) to save to the local Micro SD card when the
network connection to FTP is unavailable.
Table 5-22 FTP Configurations (cont’d)
Parameter Function
Table 5-23 NAS Configurations
Parameter Function
Enable Check this box to enable the NAS option.
Server Address Set the IP address of the NAS server.
Remote Directory
Set storage directory where recorded video and snapshots will be
stored.
To Next Page
Loading...
