www.honeywell.com/security
54 | Performance Series IR 1080p IP PTZ Camera User Guide
Figure 5-16 P2P Configuration Interface
Connection
Figure 5-17 Connection Configuration Interface
Table 5-14 Connection Configurations
Parameter Function
Max Connection This shows the maximum number of network connections for the same
camera. The value ranges from 1 to 20. The maximum number of
connections is 20.
TCP Port The default setting is 37777. You can modify this setting as necessary.
UDP Port The default setting is 37778. You can modify this setting as necessary.
HTTP Port The default setting is 80. You can modify this setting as necessary.
To Next Page
Loading...
