Honeywell Performance HDZP252DI - Restarting the PTZ Camera; Restoring PTZ Default Settings

PTZ Functions | 89
800-22757 - A - 02/2017
Deleting Time Tasks
1. Navigate to Setup  PTZ  Function  Time Task (see Figure 6-9).
2. Click Clear All to delete all of the programmed time tasks.
Copying Time Task Settings to Another Time Task
1. Navigate to Setup  PTZ  Function  Time Task (see Figure 6-9).
2. Select the Time Task to be copied from the Time Task num drop-down list.
3. Select the Time Task to be receive the copied settings from the Copy To Task No.
drop-down list.
4. Click Copy.
Restarting the PTZ Camera
When the PTZ camera needs to be restarted, you can perform this restart function.
Figure 6-10 PTZ Restart Interface
1. Navigate to Setup
 PTZ  Function  PTZ Restart (see Figure 6-10).
2. Click PTZ Restart to restart the PTZ camera.
Restoring PTZ Default Settings
When the PTZ camera needs to be reset to its default settings, you can perform this default
function.