Logging In and Viewing Live Video | 23
800-22757 - A - 02/2017
System Menus
Figure 3-7 System Menu
When you log in to the camera using the web client, the Live View interface opens by default.
To access the Playback, Setup, and Alarm interfaces, or to log out, select the corresponding tab
in the system menu.
Live View Controls
From the Live View controls toolbar, you can zoom in on a scene, take a snapshot, or manually
record video. These controls are described with detail in Table 3-2.
Figure 3-8 Live View Window Controls
Table 3-2 Live View Window Controls
Icon Control Description
Regional
Focus
You can force the camera to focus on a specific region in
the scene by clicking Regional Focus and then drawing a
box over the region to focus on by clicking and dragging
the mouse on the video image. The camera will adjust the
focus so the selected region becomes more clear.
Draw on the
Image
Use the Pencil icon to draw on the live view image. Use this
option to circle items of interest so they can be easily seen
when going over recorded video. Click the arrow beside
the pencil to select from either red, blue or green pencil.
Double-click the pencil icon to clear the image.
Digital Zoom
While viewing live video, click and hold down the left
mouse button to zoom in on a specific area. Right-click the
mouse to return to the previous magnification.
Snapshot
Click to take a snapshot, saved as a JPEG at the default
location (\picture download).
To change the save path, see Path on page 51. Or go to
Setup
Camera Video Path.
Triple Snap
Click to take three snapshots at 1 fps. All images are saved
to the path as set in Setup
Camera Video Path.
Record
Click to start manual recording. All video is saved to Setup
Camera Video Path.
Audio Output Click to enable/disable audio when monitoring a scene.
Bidirectional
Talk
Click to enable/disable bidirectional talk to communicate
with someone within range of the camera.
Help Click to open Help.
To Next Page
Loading...
