Configuring Camera Settings | 65
800-22757 - A - 02/2017
Figure 5-29 Holiday Schedule
Destination
Path
On the Path tab, you can assign where recorded video files or snapshots will be saved.
Depending on your camera model, you can save recorded video or snapshots to a Micro SD
card, an FTP server, and/or an NAS disk.
You can also set up the system to save recorded video and snapshots files according to event
type (Scheduled, Motion Detect, Alarm), corresponding to the three record modes in the
Schedule Interface (General, Motion, Alarm).
Figure 5-30 Path Configuration Interface
Table 5-21 Path Configurations
Parameter Function
Event Type Select Scheduled, Motion Detect, or Alarm.
Local Select to saves files to the Micro SD card
FTP Select to save files to the FTP server.
NAS Select to save files to the NAS disk.
To Next Page
Loading...
