www.honeywell.com/security
62 | Performance Series IR 1080p IP PTZ Camera User Guide
Note You also need to go to the Live interface to set the protocol to Multicast. See
Protocols in Video Encoder Controls on page 22.
Figure 5-25 Multicast Configuration Interface
IEEE802.1X
IEEE802.1X is the access control and authentication protocol for local and metropolitan area
networks. It uses a port-based network access control protocol to restrict unauthorized user
and/or device access to the LAN.
IEEE802.1X supports the client’s ability to manually choose how authentication works for
accessing the LAN or not. IEEE802.1X supports the ability to:
• authenticate
• calculate the fee
•ensure security
• maintain requirements
Table 5-18 Multicast Configurations
Parameter Function
Enable Select the check box to enable the multicast function.
Note
Main stream and sub stream cannot be used at the same time.
Multicast Address The main/sub stream multicast address is 239.255.42.42 and its range
is 224.0.0.0~239.255.255.255.
Port The Multicast port. The main stream is 36666; the sub stream is 36667,
and the range is 1025~65534.
To Next Page
Loading...
