www.honeywell.com/security
50 | Performance Series IR 1080p IP PTZ Camera User Guide
Video Overlay
Figure 5-12 Video Overlay Configuration Interface
Table 5-11 Video Overlay Configurations
Parameter Function
Privacy Mask
Masks areas of the video for privacy. You can configure up to 24
privacy mask zones.
Select the mask to configure with the SN drop-down list. Use the
PTZ controls to move the camera to the area to be masked, then
click Draw and click and drag a box in the image over the area to
be covered.
Click Delete to delete the selected privacy mask.
Click Clear to delete all of the privacy masks.
Click Go to to move the camera image to the selected mask.
Channel Title
Enable this function to overlay channel information in the video
window. Use the mouse to drag the channel title to the desired
position.
Time Title
Enable this function to overlay time information in the video
window. Use the mouse to drag the time to the desired position.
OSD info
Enable this function to overlay OSD info and text in the video
window. Enable the type of info to be overlaid from the options
presented: Preset, Temperature, Coordinates, Zoom, and Text
Overlay. If Text Overlay is enabled, enter any text to be overlaid in
the Input Text field. Select Right or Left alignment from the Text
Align drop-down menu.
Font Select the font Size of any overlaid text here.
Picture Overlay
Enable this function to overlay a picture in the video window. Click
Upload Picture to choose an image to be overlaid on the video.
To Next Page
Loading...
