www.honeywell.com/security
60 | Performance Series IR 1080p IP PTZ Camera User Guide
UPnP
UPnP lets you establish the mapping relationship between the LAN and the public network. In
the UPnP configuration interface, you can add, modify, or remove a UPnP item.
Figure 5-23 UPnP Configuration Interface
Enabling UPnP in Windows
When UPnP is enabled in Windows, the camera can be detected automatically through My
Network Places.
Interval
The delay interval for sending the email ranges from 0 to 3600 seconds.
0 seconds means that there is no delay interval.
The system will not immediately send the email when the alarm occurs.
When an alarm, motion detection, or abnormality occurs to activate an
email, the system sends the email according to the interval that you
have specified here. This reduces the load on the email server when
numerous emails are triggered simultaneously.
Health Mail Select the check box to enable the health email function.
Update Period
(interval)
This allows the system to send a test email to check the connection.
Select the check box to enable this function, and then set the
corresponding email interval.
You can set the Update Period so that the system sends out regularly
scheduled emails.
Email Test
The system will automatically send an email to test the connection.
Before you can send an email test, you must save the email setup
information.
Table 5-17 SMTP (Email) Configurations (cont’d)
Parameter Function
To Next Page
Loading...
