www.honeywell.com/security
66 | Performance Series IR 1080p IP PTZ Camera User Guide
Local
On the Local tab, you can view local Micro SD card disk information (such as capacity). You can
also access the Read Only, Read & Write, Hot Swap, and Format functions.
Figure 5-31 Local Storage Configuration Interface
FTP
On the FTP tab, you can enable the FTP storage function. When enabled, event-triggered video
and snapshots (either scheduled or motion detection, depending on what you chose in Path on
page 65) will be saved to the specified FTP server.
Figure 5-32 FTP Configuration Interface
Table 5-22 FTP Configurations
Parameter Function
Enable Check this box to enable the FTP option.
Server Address Set the IP address of the FTP server.
Port The default setting is 21. You can modify this setting as necessary.
User Name Enter the server user name.
Password Enter the server password.
To Next Page
Loading...
