www.honeywell.com/security
16 | Performance Series IR 1080p IP PTZ Camera User Guide
Figure 2-3 Upgrade Screen
The device will reboot when the upgrade is complete. The message Device is
offline: [device IP address] appears while the device is rebooting.
To upgrade multiple devices simultaneously:
1. Click Batch Mode in ConfigTool.
Figure 2-4 Select Batch Mode
2. Click to select all of the devices that you want to upgrade from the list of devices, and then
click Start (see Figure 2-5). Hold Ctrl while selecting to select multiple devices.
To Next Page
Loading...
