Configuring Camera Settings | 45
800-22757 - A - 02/2017
IR Light Settings
Figure 5-7 Camera Setup - IR Light Window
Table 5-7 Camera IR Light Configurations
Parameter Function
Profile Select from Normal, Day, Night.
IR Mode
Set the intensity of the IR light with the Mode drop-down menu:
ZoomPrio (default): IR Light is on and automatically adjusts according
to the brightness of the actual scene and the zoom setting. Adjust the
IR Correction setting from 0 to 100. 50 is the default setting.
Manual: Manually adjust the intensity of the NearLight and FarLight
IR lighting from 0 to 100.
Off: IR Light is disabled.
Full-screen
Test
Click the button on the bottom left of the video window to begin a
full-screen test. Double-click to return to the normal screen.
Default Click to return the camera to the default setup.
Refresh
Click to cancel the current operation and restore the previously saved
operation.
Save Click to save the currently configured customized settings.
To Next Page
Loading...
