www.honeywell.com/security
46 | Performance Series IR 1080p IP PTZ Camera User Guide
Defog Settings
Figure 5-8 Camera Setup - Defog Window
Table 5-8 Camera Defog Configurations
Parameter Function
Profile Select from Normal, Day, Night.
Defog Mode
Set the defog mode with the Mode drop-down menu:
Auto: Defog is on and automatically adjusts according to the
fogginess of the actual scene.
Manual: Manually adjust the defog Intensity setting from Low, Middle
and High.
Off (default): Defog is disabled.
Full-screen
Test
Click the button on the bottom left of the video window to begin a
full-screen test. Double-click to return to the normal screen.
Default Click to return the camera to the default setup.
Refresh
Click to cancel the current operation and restore the previously saved
operation.
Save Click to save the currently configured customized settings.
To Next Page
Loading...
