Configuring Camera Settings | 37
800-22757 - A - 02/2017
Exposure Settings
Figure 5-2 Camera Setup - Exposure Window
Sharpness
Adjusts video sharpness. Choosing a higher value increases the sharpness of
the video. Select from 0 to 100. The recommended range is between 40 and
60. The default value is 50.
Note Choosing a higher value can introduce video noise to the image.
Sharpness
CNT
Adjusts video sharpness. Choosing a higher value increases the sharpness of
the video. Select from 0 to 100. The recommended range is between 40 and
60. The default value is 50.
Gamma
Adjusts dynamic range. Choosing a higher value increases the brightness of
the image non-linearly. Select from 0 to 100. The recommended range is
between 40 and 60. The default value is 50.
Flip
0°: Video is not flipped. This is the default setting.
180°: Flips the video 180°.
Full-screen
Test
Click the button on the bottom left of the video window to begin a
full-screen test. Double-click to return to the normal screen.
Default Click to return the camera to the default setup.
Refresh
Click to cancel the current operation and restore the previously saved
operation.
Save Click to save the currently configured customized settings.
Table 5-1 Camera Picture Configurations (cont’d)
Parameter Function
To Next Page
Loading...
